ITEC EM 300
Condenser Microphone

EM-300 is a back electret condenser microphone with cardioid polar pattern and is applicable for versatile purposes. As a nicelooking and stout microphone, it features excellent electroacoustic performance, with a low-cut filter switch available on the body. It makes an ideal candidate for the reinforcement and recording of vocals and musical instruments, and it is also suitable for the picking-up in conferneces and interviews.
Features
- Optimal low frequency response and proper elevation in mid-high frequency
- High sensitive, low distortion
- Low handling noise, with a double-layer anti-POP barrier
- High gain before feedback
- High sound pressure level, wide dynamic range
- Low-cut filter switch
- One mute switch
Accessory:
One HM-9B rotatable holder, one YA-1 5/8" x 27T to 3/8 x 16T screw adaptor

Application as a Choir Microphone
We receive a lot of requests for choir microphones, i.e. microphones that are capable of evenly picking up an entire choir. In a studio this may be possible to a certain extent, for recordings and broadcasts, but for simultaneous live playback, e.g. in a church or an event hall, it is not. This is how it can be done: We have had excellent results using the EM 300 for choirs, if, depending on the choir size, three to four microphones are used.
Specifications
Type: | Back electret condenser |
Polar pattern: | Cardioid |
Frequency Response: | 50-16000 Hz |
Sensitivity: | -40 dBV/Pa (10 mV/Pa) |
Rated impedance: | 200 Ohm |
Max. SPL: | 136 dB (THD<1% 1000Hz) |
Power supply: | 12-48 V |
Connector: | XLR 3 pins silver-plated |
Dimension: | Ø 45 (max.) x 180 mm |
Net weight: | 240 g |
All information without guarantee. Subject to technical changes.
.