ITEC*NET

ITEC*NET

ITEC*NET è una rete  audio, basata su Ethernet IEEE802.3, per la trasmissione digitale contemporanea di un massimo di 64 canali audio in qualità da studio di registrazione con un tempo di latenza costante di 1,33ms. È indicato sia per piccole linee di trasmissione audio da punto a punto che per sistemi audio decentrati di struttura più complessa, per la sonorizzazione di eventi, allarme verbale e/o sistemi elettroacustici di evacuazione.
Tutti i componenti del sistema sono certificati secondo norma EN 54-16.

Leggi avanti ...

Spider44/03

The combines break-in/break-out module in 19" / 1 RU design, equipped with 4 analogue audio inputs and 4 analogue audio outputs, control IOs, serial interface, network port and 24 VDC power supply.

4 analogue audio inputs and 4 analogue audio outputs
8 analogue measurement inputs 0-10 V
8 digitale control inputs, 8 digitale control outputs
2x ETHERNET (RJ45), 1x RS232, 1x RS485
Power supply: 24 VDC

Leggi avanti ...

Spider88

The combines break-in/break-out module in 19" / 1 RU design, equipped with 8 analogue audio inputs and 8 analogue audio outputs, network port and 24 VDC power supply.

8 analogue audio inputs and 8 analogue audio outputs
8 analogue measurement inputs 0-10 V
8 digitale control inputs, 8 digitale control outputs
2x ETHERNET (RJ45), 2x RS232 / RS485
Power supply: 24 VDC

Leggi avanti ...

Dante Bridge

The Dante Bridge in 19“/1U design is equipped with a Dante board from Audinate to transfer 8 digital Dante channels each.
8 digital Dante audio inputs and 8 digital Dante audio outputs
1x RS232 / RS485
4x ETHERNET RJ45 socket ITECNET (switch)
2x ETHERNET RJ45 socket Dante
Power supply: 24 VDC

Leggi avanti ...

Spider04/03

When audio outputs are the priority: The break-out module in 19" / 1 RU design, equipped with 4 analogue audio outputs, control IOs, serial interface, network port and 24 VDC power supply. 

4 analogue audio outputs
8 analogue measurement inputs 0-10 V
8 digitale control inputs, 8 digitale control outputs
2x ETHERNET (RJ45), 1x RS232, 1x RS485
Power supply: 24 VDC

Leggi avanti ...

Display Control Unit_43

Display and control unit for ITECNET systems

Leggi avanti ...

Spiderline16/03

The Spiderline16 has the functionality of the Spider44 (4 audio inputs, 4 audio outputs) and also offers a relays matrix for 16 monitored 100-volt speaker zones (matrix 4 x16 incl. back up concept).

4 x 100 V speaker in, 4 x 100 V back up amplifiers in
16 monitored 100 volt speaker lines
4 analogue audio inputs and 4 analogue audio outputs
8 digitale control inputs, 8 digitale control outputs
2x ETHERNET (RJ45), 1x RS232, 1x RS485
Power supply: 24 VDC

Leggi avanti ...

SpiderMike2/03

The ITECNET call station in modular design with two-line display and clearly-arranged membrane keypad. The 19 softkeys can be easily labelled. The modular design allows for extensions to 115 keys max. 

Leggi avanti ...

Panel Control Unit_12

Control unit for ITECNET Systems

Leggi avanti ...

Business-Callstation 1/8

Call station for ITEC*NET system

Leggi avanti ...

Business-Callstation1/3

Call station for ITEC*NET system

Leggi avanti ...

Firefighters Callstation acc. to ONORM F30333/02

Call station according to ÖNORM F3033

Lockable, red steel housing
Handheld microphone with push-to-talk button
1 integrated speaker
Alarm text keys, integrated speech memory
Status displays for alarm, operation, error
6 analogue measurement inputs, 2 digital outputs
Power supply: 24 VDC

Leggi avanti ...

Firefighters Callstation RS485 (F3033)

The ITECNET Firefighters callstation RS485 is a remote call station for the connection to an ITECNET Spiderline16 or Spider44. The call stations hardware is installed in a standard housing according to ÖNORM F3033.
The call station offers the standardized Austrian user interface for security calls with lockable door.
Connectors inside: 8-pin Phoenix plug or RJ45 (ITEC-BUS, 2x analogue audio sym., 24 VDC).

Leggi avanti ...

Switch 4/1

Certified network switch (according to EN 54-16) with 2 x 4 Ethernet (IEEE802.3u standard) and 2 fibre optic ports. 24 VDC supply voltage and thus, like all other ITECNET components, suitable for emergency power supply. Installation dimensions 19" / 1 RU.

2x 4x 10/100 Mbps Fast Ethernet Port
2x 100 BASE-FX Port (802.3u 100 BaseFX-compliant)
IEEE 802.1q tag-based VLAN
Automatic MDI/MDI-X crossover
Power supply: 24 VDC

Leggi avanti ...

CAT5 Repeater

Ethernet switch in wall-mounted enclosure with 1 x 4-port copper (RJ45) and 1x fibre
optic port (duplex SC connector), for increasing ranges of installations, 24 VDC power
supply for supply conformant to standards with EN 54-4 certified power supply devices.

Leggi avanti ...

DigiPower 2x500T_D

Two-channel digital power amplifier with 2x500W nominal power for professional electroacoustic voice alarm systems. The electronic protective circuits ensure the necessary safety of the amplifier. In case of a power failure automatically switched to emergency power operation (battery 24V). A very reliable electronics design guarantees uncompromising transmission quality and long-term trouble-free operation. Thanks to digital signal processing, up to 90% efficiency and hardly any waste heat.

Leggi avanti ...

DigiPower 4x500T_D

Four-channel digital power amplifier with 4x500W nominal power for professional electroacoustic voice alarm systems. The electronic protective circuits ensure the necessary safety of the amplifier. In case of a power failure automatically switched to emergency power operation (battery 24V). A very reliable electronics design guarantees uncompromising transmission quality and long-term trouble-free operation. Thanks to digital signal processing, up to 90% efficiency and hardly any waste heat.

Leggi avanti ...

DigiPower 1x250T/02

Professional, certified audio amplifier for 230 VAC and 24VDC operation (suitable for emergency power supply!). Highly effective thanks to digital amplifier concept with 90% efficiency. Low mounting depth (272mm) and maintenance-free operation thanks to heat abstraction without fans. Only 10-Watt power consumption in standby mode!

Certified for voice alarm systems according to EN 54-16.

Audio input: 2 x Line-In, balanced
Output: 1 x 250 Watt, 50/100Volt
Bridged mode: 1 x 250 Watt
Mounting dimensions: 19", 2 RU

Leggi avanti ...

DigiPower 2x250T/02

Professional, certified audio amplifier for 230 VAC and 24 VDC operation (suitable for emergency power supply!). Highly effective thanks to digital amplifier concept with 90 % efficiency. Low mounting depth (272 mm) and maintenance-free operation thanks to heat abstraction without fans. Only 10-Watt power consumption in standby mode!

Certified for voice alarm systems according to EN 54-16.

Audio input: 2 x Line-In, balanced
Output: 2 x 250 Watt, 50/70/100Volt
Bridged mode: 1 x 500 Watt
Mounting dimensions: 19", 2 RU

Leggi avanti ...

DigiPower 4x150T/02

Professional, certified audio amplifier for 230 VAC and 24 VDC operation (suitable for emergency power supply!). Highly effective thanks to digital amplifier concept with 90 % efficiency. Low mounting depth (302 mm) and only 10-Watt power consumption in standby mode!

Certified for voice alarm systems according to EN 54-16.

Audio input: 4 x Line-In, balanced
Output: 4 x 150 Watt, 50/100 Volt
Bridged mode: 1 x 500 Watt
Mounting dimensions: 19", 2 RU

Leggi avanti ...

VAC-Panel/02

Display panel according to EN 54-16 for visual and acoustic status message

Leggi avanti ...

DigiPower 4x150T_D

Four-channel digital power amplifier with 4x150W nominal power for professional, electro-acoustic voice alarm systems.The electronic protection circuits ensure the necessary safety of the amplifier. In case of a power failure the amplifier automatically switches to emergency power mode (external battery 24V). A very reliable electronic design guarantees uncompromising transmission quality and long-term, trouble-free operation. Digital power amplifiers with a direct output, without a transformer, off er high efficiency with low weight, smaller size and comparatively less waste heat.

Leggi avanti ...

EOL3/03

Line monitoring module according to EN 54-16

Leggi avanti ...

AVC-MIC/02 (Automatic Volume Control-Microphone)

The ITEC AVC-MIC is a measurement microphone specially designed for use with ITEC-NET Spider44, Spider04 and Spiderline16 for automatic volume control of background music and announcements in consideration of the ambient noise level.

Leggi avanti ...

AVC-MONITORING

ITEC AVC Monitoring is a module for the monitoring of up to four microphone lines (specially designed for the use with the ITEC AVC-Mic).

Leggi avanti ...

EARTH FAULT MONITORING

ITEC EARTH FAULT MONITORING is a module for the monitoring of 24 volts power supply cables for remote system components (eg callstations).

Leggi avanti ...

IO Expander/02

The ITECNET IO Expander is an interface extension for a Spider device.

Leggi avanti ...

I/O-Relay-Expander

• Fully compatible with ITECNET components
• 8 additional potential-free relay outputs, 16 digital inputs and 8 analog inputs
• The relay outputs are 2-pole change over switches (DPDT)< ...

  Leggi avanti ...

O-Relay-Expander

The ITECNET O-Relay-Expander is an interface extension for ITECNET components.

Leggi avanti ...

I/O-Expander Relay Extension

Relay expansion card for I/O-Relay-Expander and O-Relay-Expander

Leggi avanti ...

UP-Remote-Control-Panel

Pannello comandi per selezione programma e zone d’uscita, regolazione volume, eccetera. Comunicazione mediante RS 485 (fino a 16 moduli su un ITEC-NET Spider)

Leggi avanti ...

Line Detection Module/02

Plug-in PCB board to ETHERNET AUDIO DATA MODULE for 4 loudspeaker circuits
(Spider 44/Spider 04)

Leggi avanti ...

Industrial Micro SD Card

Memory card as a voice memory for industrial applications

Leggi avanti ...

SPM-DM Gooseneck Microphone

The dynamic ITEC SPM-DM gooseneck microphone for rooms with difficult acoustics

Leggi avanti ...

Alimentazione Corrente d'Emergenza

L’alimentazione di corrente digitale ITEC DSV54-4 è certificata secondo la norma EN 54-4:1997+A2:2006. Serve per alimentare i componenti dei moduli e per il caricamento e la sorveglianza delle batterie della corrente d’emergenza. 24 Volt, capacità fino a 160 Ah!

Leggi avanti ...

Software NET*DESIGN

ITEC*NET DESIGN è un software basato su Windows, per configurazione, visualizzazione, sicurezza e sorveglianza dell’intero sistema ITEC*NET.

Leggi avanti ...

Altoparlante EVAC

I più importanti altoparlanti per sonorizzazione ITEC sono certificati secondo la norma EN 54-24, o si trovano in fase di certificazione.

Leggi avanti ...

API (Application Programming Interface)

L’interfaccia software basato su TCP/IP ITEC*NET, presenta tutte le funzioni occorrenti alla gestione e sorveglianza di un sistema.

Leggi avanti ...